Model #PLGF389CCB FRIGIDAIRE Free Standing, Gas

  • Backguard
    3 Results
  • Burner
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
  • Wiring Schematic
    3 Results
Find part by diagram >

Question and Answers

Q:

F3 error PLGF389CCB Frigidaire Gas range

A:

I found this response on another website. I'll check the wiring today. Old 10-09-2013, 01:25 AM denman denman is offline Senior Expert APP Volunteer Join Date: Feb 2008 Posts: 16,785 denman is a glorious beacon of light Default Here are your parts Parts for Frigidaire PLES389CCB Range - AppliancePartsPros.com Here is a wiring diagram. http://manuals.frigidaire.com/prodin.../318045064.pdf First I would check that the new sensor is OK. Should be about 100 ohms at room temperature. Always a possibility that you have a bad replacement. This would be a long shot. You will see that there is a thermal circuit breaker (item F219 in the Body Parts section) in the sensor circuit. Unplug the unit and check it with a meter. Use the most sensitive meter scale. Also short the leads together before starting your measurement so you know if there is any zero offset in the meter. It should be 0 ohms. Check the connectors in the oven sensor circuit, that they are clean, properly connected and crimped. If all the above are OK then odds are that the problem is on the control board. Check the connector on the board for a cold solder joint. Often a cold join will be a duller silver color and/or have pin holes. Gently wiggle the connector while watching it's solder side, to see if the legs move in the solder. Check for any hairline cracks across the tracks on the board that go to the oven sensor. If all OK then the problem is most likely an electronic fault on the board. Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/536751-frigidaire-electrolux-stove-f3-wont-clear.html#ixzz32ddM2Sqa http://forum.appliancepartspros.com

Read More
Keith -
May 24, 2014
A:

Thanks for the inquiry and for using SearsPartsDirect.com.
The F3 error code does indicate an issue with the temperature sensor circuit, which is comprised of the temperature probe and the electronic control board. The temperature probe should have a resistance of 1095 ohms at room temperature of 75 degrees. If it checks out, the electronic control board will need to be replaced to solve the issue.
If by chance you determine that the board needs to be ordered, I have provided a blue link below that you may click on to be directed to the SearsParts site to view and purchase the board when needed. Since you've replaced the temp probe (presuming it's not defective), the board would be the next most logical selection.

Electronic Control Board for Model PLGF389CCB

Overlay for Control Board for Model PLGF389CCB

Hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 


Read More
Jeff Wallace Sr -
Sears Technician
May 24, 2014
See more answers
Q:

THE BROILER ON MY FRIGIDAIRE GAS RANGE MODEL NUMBER PLGF389CCB DOES NOT IGNITE. OVEN (BAKE AND ROAST), WORKS OTHERWISE.

A:

Having your appliance not working properly can be really concerning especially when we use it on a daily base. While you are waiting on an expert to answer your question, a suggestion I have is to visit Sears Home Services website to set service with a Sears technician. I have attached the link below. Hope this helps!

Read More
Dezeray S -
April 12, 2011
A:

Thank you for your question.

I can understand wanting to have the broiler work on the range.

I would suggest you turn the broil function on for the oven and open the oven door and look up in the ceiling of the oven cavity to see if the igniter coil is glowing bright orange/red.

If it is the problem is in the dual gas valve in the range.

If it is not glowing the igniter has possibly failed or the control board is not giving power to the igniter.

The most likely part that has failed is the igniter and it is the easiest to change.

If you would like to repair this range yourself you will need a multi-meter to check the igniter circuit.

If you discover that the igniter is bad the part number for the igniter is: 316119302 and you can purchase it from: Sears Parts Direct .

If you intend to do the repair please reply and I will be glad to step you through the process.

Do to the inherent danger of gas appliances I would recommend that you have a technician repair your gas range.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 13, 2011
See more answers
Q:

How do I adjust the broiler flame on my gas oven?

A:


The broiler flame should be able to be adjusted on your model range. Follow the broiler burner tube over to the right side and you will see it slipped over an air mixing elbow. The elbow will have an adjustable orifice screwed into the end pointing into the broiler tube. You will need to have two proper size wrenches. One to hold the gas line side from twisting while you adjust the orifice. To increase the flame size turn the orifice counter clockwise. Turn the orifice 1/4 of a revolution at a time and retest the flame size.

Read More
expert -
Sears Technician
August 23, 2007

Top Parts