Model #PLES389DCC FRIGIDAIRE Slide-In Range, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Question and Answers

Q:

Display and controls not functioning PLES389DCC Frigidaire Electric range

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your range displays is not working.

Yes, you will need to replace the control board. The control board is the display as well as the board to control the buttons.

 
316272204 is the replacment part number.

 You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
November 03, 2014
A:

Your Frigidaire PLES389DCC oven control board sometimes called main control board or Frigidaire Range/Stove/Oven Oven Control Board part number 316272204 is probably shot. You should first check to see if your bake and broil elements are not burned out - they will have bubbling on the surface or completely burned through - you can remove them and check for continuity to be sure. If one or both are burned out they are easy to replace be sure the replacement part is the EXACT shape of the original element because they will short to the metal frame if not the correct length. The control board is not the same as the control panel part number 318239700 which is only the surface button and does not include the main oven control board. The oven control board is mounted on the underside of the control panel. To remove the control panel all you need to do is 1. Turn off the breaker to your range oven stove - VERY IMPORTANT since you can not slide the unit out easily to unplug it. 2. Remove the 4 burner knobs by gently pulling them straight up. 3. Remove the 4 black plastic nuts directly under each knob they have slots on each side of the burner stems - you can open a pair of needle nose pliers and put the tips in the slots and gently turn - these nuts are not tight like a metal nut would be. 4. Lift gently on the sides of the panel and it should slide off. If not clean any gunk off around the edges with a toothpick. There is a rubber gasket that sits between the control panel and the glass top be careful not to damage it or just order a new one if you need to replace it with the control panel. 5. Unscrew the 4 screws holding the main control board on the control panel and set them aside in a safe place. 6. Remove each wire or connector one at a time and connect them to the new main control board. OR take a picture or write down the color of each wire and the location of the wire. Carefully remove the spade connectors by gently wiggling the spade portion of the connector while pulling do not pull on the wire or small neck of the spade connector. Because the spade can snap off easily you may want to have some spares and a crimping tool available to repair any mishaps. 7. Be careful with the ribbon connectors that go between the control panel and the main control board. Do not crimp them or bend them. Remove the ribbon connectors first but attach them last, is my suggestion 8. Be sure all wires and connectors are secure and replaced exactly as they were on the original part. 9. Replace the rubber gasket on the control panel if it was dislodged making sure it is secure. Flip over the control panel and make sure no wires are crimped when you place the panel back on the range. The rubber gasket should slide into the space between the glass top of the range and the edge of the control panel �?? this gasket keeps spills out of the control area and is important for safety. 10. Replace the plastic nuts on each of the range knobs �?? do not over tighten these nuts. 11. Replace the knobs. 12. Turn the oven/range circuit breaker back on. 13. If you hear any type of noise such as buzzing or popping turn the breaker back off immediately . 14. You need to set the time. You may need to recalibrate the oven temperature after replacing the control board. See your manual or search to see the process �?? it is easy. 15. Set the oven to bake at 300 and check to see that the bottom oven element turns red and heats the oven. You may want to also check the broiler, convection, and warmer drawer elements as well as each of the range top cooking elements for correct operation.

Read More
Cheryl -
March 02, 2015
See more answers
Q:

How to plug in clock/timer/controller ples389dccc

A:

Thank you for your inquiry on your FRIGIDAIRE Slide-In Range, Model: PLES389DCC. From reviewing the details on your model, I found a video with a similar model of range that takes you step by step on how to install the control board.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
February 26, 2015
Q:

F1 Err message PLES389DCC Frigidaire Electric range

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help you. Upon researching model PLES389DCC there is 2 parts it could be. First the lowest priced one is the temperature probe. It reads the temperature and sends that to the board. The other part is the electronic control. I linked the diagrams below. Probe is number 37 in diagram. Control board is number 20 in diagram.

Click here for control  board diagram.

Click here for temperature probe diagram.

If you have any further questions please re-post. Thank you for choosing Sears. Have a great day.

Read More
Samantha A -
Sears Technician
May 16, 2014
A:

Thank you very much. Number 20 on the Parts list is called the Timer Clock. Just making sure that is the same thing as the Control Board.

Read More
Lynne -
May 16, 2014
See more answers

Top Parts