Model #PLEFMZ99ECN FRIGIDAIRE Free Standing, Electric

  • Backguard
    3 Results
  • Body
    3 Results
  • Top/drawer
    3 Results
  • Door
    3 Results
Find part by diagram >

Question and Answers

Q:

My range is showing an F13 error. What does that mean?

A:

Error codes can be very frustrating. I found some information for you that I am hoping will be able to help you out. Please click here: F13 Error Code. Your expert will also help answer your question. It may take two business days. I do hope that everything works out.

Read More
Marc -
March 10, 2013
A:

I know that it can be very frustrating to have issues with your range. An F13 error code normally indicates that you have a bad EOC (Electronic Oven Control board). There is a possibility that you can get this error code due to a power surge through the electrical power lines. Try disconnecting the electrical power to the range by turning off the electrical breaker. Leave the power disconnected for at least 30 seconds. Reapply the power by turning the breaker back on. If the error code reappears, you will need to replace the EOC. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
March 11, 2013
See more answers
Q:

The oven and stove top do not get hot. The warming oven works and the controls light up. It just happened on so quick. It worked for breakfast then not!

A:

It can be upsetting to have a reliable appliance just suddenly stop working. One place I always check is the troubleshooting guide in the owner's manual. You may have already done this. The only thing I really found in the manual for your range is that the time of day must be set for oven to operate. Page 39. I did locate a similar question from a previous expert post with a possible explanation. I Attached it below if you wish to check it out. It may help while you wait for the expert to review your model. Hope this helps!

Read More
Barbara H. -
December 26, 2010
A:

Your symptoms point to a voltage supply problem or a wiring failure. The range apparently has the 120 volt L1 leg of power supplied to it since the control lights up and the warming oven works (the warming oven and control work off of 120 volt power). According to your details, the 120 volt L2 leg of 240 volt power is not being supplied to the elements so that they will heat.

I provided a wiring diagram in the first image below with that L2 leg of power traced in red.

I recommend that you check the house circuit breakers (or fuses) for the range outlet first. If the house breakers (or fuses) are okay, then I recommend that you check the voltage at the range outlet using a volt/ohm meter. The second image shows a diagram of the voltage that you should measure at the outlet. NOTE: You should only check this live outlet voltage if you are completely confident in your technical ability to safely measure it .

If the outlet is okay, I recommend that you check the wiring connections on the terminal block on the back of the range (with the range still unplugged ). The 3rd and 4th images show the wiring connections on the terminal block.

If you find no problems with any of these issues, then you likely have an internal wiring failure in the range. I recommend that you have a service technician diagnose and repair that type of problem. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, with this problem, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 28, 2010
A:

Here is the 4th image.

Read More
Lyle W -
Sears Technician
December 28, 2010
See more answers

Top Parts