Model #PLEB30M9ECD FRIGIDAIRE Built-In Oven, Electric with Microwave

  • Control Panel
    3 Results
  • Microwave
    3 Results
  • Lower Oven
    3 Results
  • Doors
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

MICROWAVE WON'T RUN PLEB30M9ECD Frigidaire Electric oven w/microwave

A:

Thank you for contacting SearsPartsDirect.com with your questions about your Frigidaire Microwave. I am so sorry to hear that the microwave isn’t working. I know what a time saver the microwave is and that you want to get it working again quickly. In this case you really need to have it tested and repaired by a qualified technician.

 

We do not give advice on repairing microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is unplugged from the outlet. You need special equipment to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after any microwave service.

 

For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME (1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project.

 

Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs. Thank you for choosing Sears and using our SearsPartsDirect.com service.

Read More
Rachel Morgan -
Sears Technician
September 28, 2013
Q:

Door won't open on microwave PLEB30M9ECD PLEB30M9ECD Frigidaire Electric oven w/microwave

A:

I am sorry you are experiencing difficulties with your Microwave. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage and a microwave shielding leakage test must be performed using a survey meter after any microwave service. I strongly suggest that you have this repair handled only by a qualified service technician. I have provided a link To Sears Home Services if you decide to schedule service. If you think it may be cost effective to just replace the unit, I have also provided a link to the Microwave section of Sears.com to price out what a replacement would cost.

Read More
Joseph P. -
October 17, 2012
A:

Thank you for your question and I understand your concern.

The lever which is one of several components in the door latch assembly is most likely faulty or broken and it will likely need to be replaced.

I am sorry, but we do not give repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. Door repairs and adjustments, even minor ones, can cause microwave leakage, and a microwave shielding leakage test must be performed using a survey meter after any microwave service. That's why I strongly warn you to have this repair handled only by a qualified service technician. You can schedule service online with Sears Home Services or by calling 1-800-4-MY-HOME.

Normally at ManageMyLife.com we like to help you with all of your repairs, but our expert advice is that microwaves are just too dangerous.

Read More
Joey S -
Sears Technician
October 19, 2012
See more answers
Q:

overn model pleb30m9ecd, element broken, and element cover warped

A:

I can see how this can be really concerning after fixing it once. While you are waiting on an expert to answer your question, a suggestion I have is to visit Sears Home Services website to set service with a Sears technician. I have attached the link below. Hope this helps!

Read More
Dezeray S -
March 01, 2011
A:

Thank you for your question and I understand your concern.

Depending on the severity of the warp it will not likely cause any issues with baking. It is not abnormal for thin metal to warp when heated and cooled repeatedly.

I added the instruction provided in the User's manual in the image below. When re-installing the cover, be sure to put it all the way to the back of the oven and lay it down on the two shoulder screws. Then push the front edge of the cover in its place below the front bracket.

Read More
Joey S -
Sears Technician
March 01, 2011
See more answers

Top Parts