Model #PFS22SBSBSS GE Bottom-Mount Refrigerator

  • Doors
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Water System
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

GE Refrigerator doesn't keep Freezer or Refrigerator temp constant. It keeps getting warmer, and now has a clicking noice. GE Profile Frig. PFS22SBSBSS. PFS22SBSBSS Ge Refrigerator s series

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
November 30, 2012
A:

That clicking noise is probably the overload component for the compressor tripping. You could have a bad compressor or a number of other problems that would cause this failure. The start relay for the compressor could be bad or you could have a defective overload for the compressor motor. I recommend that you have a service technician diagnose and repair this failure. You can schedule service through this link: Sears Home Services .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 01, 2012
A:

I am having the same problem with my fridge. I have replaced the evaporator fan motor and the main control board. The unit is still clicking and not cooling down. Please help!

Read More
Jennifer -
November 18, 2015
See more answers
Q:

About GE Refrigerator work GE Refrigerator Mod.#PFS22SBSBSS

A:

I know that it can be very difficult to have issues with your refrigerator. This can be caused if the damper inside the diffuser stays open. If this happens, the air flow will never be reduced as the refrigerator cools down. The damper could be stuck, the sensor could be keeping it open or the main board. If the freezer gets too cold, this can also happen and it would be caused from the sensor or board. The only way to determine if the board or sensor has failed is, with a meter. Some resistance checks will need to be made. A technician may be needed to make these checks. An adjustment you can try is, with the damper. Set the freezer control to a higher setting. This should reduce the amount of air being blown into the fridge section. After making an adjustment, give it 24 hours to adjust. If you don't feel comfortable doing this yourself, please click on the link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using ManageMyLife.com.

Read More
AnneJ -
Sears Technician
September 09, 2013

Top Parts