Model #PDS22SFSARSS GE Bottom-Mount Refrigerator

  • Doors & Shelves
    3 Results
  • Cabinet
    3 Results
  • Water System
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

connecting the main board for a PDS22SFSARSS and im wondering if i need to do step 4 on installation? bottom freer, but serial number is HH0 PDS22SFSARSS

A:

Dear valued customer,

Since the part is an electrical part we recommend having a technician install the main board. If you decide you would like to “do it yourself” you can find a video on You tube showing you how to install the board. This video is for installing part # WR55X10942.

If you need further assistance please call 1-800-4MYHOME Services (800-469-4663) to set up an appointment for a technician to come to your home.

Thank you for choosing Sears, we appreciate your business.

Read More
Tristie8079 -
Sears Technician
September 04, 2015
Q:

Temperature control board

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
February 09, 2013
A:

Thank you for your question. If the display board inside the fridge worked before the main board was replaced, this would lead to a defective main board or it could be a wiring problem now. The main control board for this model is # WR55X10942. If the display board did not work before and still won't work now, again check the wiring connections and if the connections are ok, the display board # WR55X10522 will probably need to be replaced. I hope this will help you.

Read More
Scott D -
Sears Technician
February 11, 2013
A:

I did replace the WR55X10942 main control board and the control panel worked before but was clicking and now it is not on at all but the temp in the fridge and freezer is fine. Do you think that replacing the main circuit board made the temperature display board go out?

Read More
Ronald -
February 14, 2013
A:

Ronald, I do not think replacing the main board made the display board fail. It would be very unusual.

Read More
Scott D -
Sears Technician
February 15, 2013
See more answers

Top Parts