Model #PATRIOT 1900 POULAN Chainsaw, Gas

  • Cylinder Shield/cylinder
    3 Results
  • Chain/bar/handle/fan Housing
    3 Results
  • Carburetor's/service Reference Note
    3 Results
Find part by diagram >

Question and Answers


replace ignition coil on my patriot chainsaw


Good morning... I appreciate your need for those instructions. I did a search on your model and was unable to locate a link that I can send you now. Keep in mind that an expert will be reviewing your request and will be getting back to you within two business days with detailed information for you. They will likely get back to you today. Until then, have a nice day

Read More
Henry -
November 19, 2012

Remove the engine shrouds to expose the ignition coil. Remove the screws to get the coil loose from the engine. Plug the new coil in and secure the screws to hold it onto the engine. Set the air gap between the coil and flywheel magnet to about .011 or .012 and tighten the screws down. Then put the engine shroud back on and you should be ready to cut some wood.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
November 21, 2012
See more answers