Model #OX SUPERWINCH Winch

  • Motor Assembly
    3 Results
  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

deck deflector replacement 917.273373

A:

Thanks for the inquiry and for being a valued member. 

I was able to find an image showing the torsion spring orientation within the bracket and deflector. You have to hold the deflector and spring in position then slide the hinge pin in. First, you have to remove the push nut on the end of the hinge pin. Usually you have to use a pair of diagonal cutters to cut the nut off. After you have the nut off note the position of the spring. In order to install the spring and hinge rod you will need to remove the hinge bracket from the mower deck. Removing the bracket will help remove tension from the spring so that you can position the spring on the deflector and then slide the hinge rod through the spring.


Image result for Craftsman tractor deflector shield installation

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 27, 2015
Q:

Belt too long? 11072974103 Kenmore Gas dryer

A:

Thanks for the inquiry and for being a valued member.

Based upon the dryer model of 110.72974103, the dryer repair kit of 4392067 is the correct kit. If the belt seems too long, it is probably not routed correctly around the idler and motor pulley. I have provided an image below to show the routing of the belt. 

Image result for kenmore dryer belt routing

There are also some great YouTube videos you can watch to see how the belts are installed and routed. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 02, 2015
Q:

I need a picture to show where the 2springs for carburetor are located or how they connect 580752100 Craftsman Pressure washer

A:

Thanks for the inquiry and for being a valued member. 

To help you with the spring placement on the carburetor, I have added a few images below from the Briggs & Stratton website. They have some great information on repair and have some great visuals. 







I hope these visuals help and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 29, 2014