Model #NUGK075DG03 ICP Furnaces/Heaters

  • Functional Replacement Parts
    3 Results
  • Non-functional Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacing furnace blower motor with new model...need help with wiring

A:

I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below if you are interested in viewing. I hope the link that I provided is helpful. Have a great day.

Read More
Alina F. -
June 24, 2011
A:

http://www.managemylife.com/mmh/questions/163200-can-i-get-a-wiring-diagram-for-my-furnace

Read More
Alina F. -
June 24, 2011
A:

that wasn't even close to an answer relative to my question

Read More
Paul -
June 24, 2011
A:

Replacing some parts can sometimes be a real challenge. Here is the link from the previous information sent to you regarding this motor. Replacing old blower motor with new, need help wiring new motor . If the original capacitor is exactly the same as the capacitor this motor calls for, it can be used but it's always a good idea to replace the capacitor when the motor is replaced. I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
June 27, 2011
See more answers
Q:

Replacing old blower motor with new, need help wiring new motor

A:

Having to do repair on an appliance can be a challenge. You will receive a detailed reply for an expert within 24-48 hours

Read More
Priscilla V -
June 15, 2011
A:

Replacing some parts can sometimes be a challenge. Unfortunately, your links are not showing up but I suspect the new motor may have less wires or different colored wires. Most all motors now will have the wiring diagram on the motor label. Now, you will also need a new capacitor # STD377315 with this motor. It�s available at SearsPartsDirect . I'm attaching the wiring diagram for this furnace and hope it will help you. The top picture is for the blower and the bottom is the complete diagram. If you would like more assistance, if you can take a picture of the motor and the diagram on the motor, it will help me to provide you with the wiring details. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
June 16, 2011
A:

Scott D......please respond after viewing my diagram that I drew up. The new motor has one less wire and the "line" is shared on different speeds. Why do I need a new capacitor if the old cap. is the same ? Thanks for your help

Read More
Paul -
June 24, 2011
A:

This new motor will wire almost exactly like your old motor. Use the yellow wire where the white wire connected and the rest of the wires will go to the same place. The new motor just lacks one of the fan speeds. I suggest using the black or high speed wire the same as the old motor used. It's always a good idea to replace the capacitor when the motor is replaced. Most of the time, it will take a different capacitor but even if it doesn't the old capacitor may be a little weak. I hope this will help you. If you would like more assistance, additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
June 25, 2011
See more answers