Model #NUG5125BKB2 ICP Furnaces/Heaters

  • Functional Replacement
    3 Results
  • Non-functional Replacement
    3 Results
Find part by diagram >

Question and Answers


Why burners ignite at 2nd stage and burn for 5 or six minutes NUG5125BKB2 Icp Furnace


Thank You for choosing Sears and being a valued member. It is unfortunate to hear that you are having issues with your furnace and I do understand your frustration. Glad to help out. I'm looking at your model number nug5125band from your description I would suspect that the electronic fan timer control. The board controls the furnaces functions. I typical do not provide advise on furnace and strongly recommend having a service technician diagnose the issue you are having. I trust this information will help you.
Thank you for choosing Sears
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 19, 2014