Model #NDG2330AWW AMANA Residential Dryer

  • Control Panel
    3 Results
  • Door, Front, Access & Top Panels
    3 Results
  • Motor & Fan
    3 Results
  • Cabinet & Base
    3 Results
  • Front Bulkhead, Air Duct & Cylinder
    3 Results
  • Rear Blkhd, Air Duct, Roller&htr (ele)
    3 Results
  • Supplemental Information
    3 Results
  • Rear Bulkhead, Roller & Air Duct (gas)
    3 Results
  • Gas Valve & Igniter
    3 Results
  • Wiring Information
    3 Results
  • Gas Valve & Igniter (series 16)
    3 Results
Find part by diagram >

Question and Answers

Q:

Amana Gas Dryer ndg2330aww - will not start. 1. yes, i have power at the outlet 2. replaced thermal fuse already. 3. checked start button and door switch-ok

A:

Having to do everything you can to an appliance can be so disappointing. While you are waiting on an expert to answer your question, a suggestion I have is to visit Sears Home Services website to set service with a Sears technician. I have attached the link below. Hope this helps!

Read More
Dezeray S -
January 08, 2011
A:

Thank you for a good description of the problem & describing the checks that you made. On something like this you will need to check the voltage to the motor with a voltmeter or you can ohm out the motor windings with an ohmmeter. This type of testing will require accessing the inside of the dryer to reach the motor. Voltage will be coming to the motor across pins 6 to 4 if you decide to check voltage. The motor windings check is listed in the images below. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: sears home service First disconnect power to the dryer. I am sending you the step by step instructions from the service manual. The lower panel, front panel & then the front bulkhead will need to come off. Then the instructions explain how to remove the drum for complete access to the motor & other related components. Once you reach the motor you will be able to make the checks outlined. Use caution while working around sharp metal or you may want to use work gloves. After reviewing the access instructions if you have any questions please reply back so we can provide you with further assistance.

Another possibility is a wiring harness problem.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
January 10, 2011
See more answers

Top Parts