Model #MTW6700TQ0 MAYTAG Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Motor, Basket And Tub Parts
    3 Results
  • Pump Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I get my washer leveled out? MTW6700TQ0 Maytag Residential washer

A:

Thank you for choosing SearsPartsDirect.com. The only thing worse than dirty laundry is an unfinished load. I recommend checking your leveling feet (W10397767). Do you have are four? Are they are on the same level. Do any feel lose or damaged? If so, I recommend replacing all four for an even level. You can give us a call at 1800-366-7278 or click here to get those parts ordered. I hope this helps you. Have a great day!

Read More
Samantha A -
Sears Technician
February 22, 2014
A:

Thank you for choosing SearsPartsDirect.com. The only thing worse than dirty laundry is an unfinished load. I recommend checking your leveling feet (W10397767). Do you have are four? Are they are on the same level. Do any feel lose or damaged? If so, I recommend replacing all four for an even level. You can give us a call at 1800-366-7278 or click here to get those parts ordered. I hope this helps you. Have a great day!

Read More
Samantha A -
Sears Technician
February 22, 2014
See more answers
Q:

Maytag Bravos washer MTW6700TQ0 will only drain 3/4 the way during wash.

A:

The problem with the washer can be very concerning. I did some research on your model number but was not able to find an answer to the problem you are experiencing. Your expert will be able to help give you a detailed answer to help you. It may take 24-48 hours. I do hope that everything works out on the washer.

Read More
Marc -
November 19, 2012
A:

From the description you give I suspect the drain pump is the problem or there is something in the hose restricting the water flow. What makes this a difficult repair to pin down is the drain pump can only be accessed by laying the washer on it's front panel. Excessive suds might cause this problem but I expect you would have mentioned suds in the water.

Read More
Fred M -
Sears Technician
November 20, 2012
See more answers

Top Parts