Model #MSC239 THERMADOR Ranges, Electric

  • Oven Lining
    3 Results
  • Control Panel
    3 Results
  • Vent
    3 Results
  • Latch Assy
    3 Results
  • Msc3g Door
    3 Results
  • Msc38g Door
    3 Results
  • Msc-239 Wiring Diagram
    3 Results
  • Msc239 Schematic
    3 Results
Find part by diagram >

Question and Answers

Q:

Where is the fuse

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner. Have a great day!

Read More
Alina -
October 06, 2012
A:

There is a safety Hi-Limit thermostat on the back of the oven that would shut off BOTH bake and broil. If only bake is not working, then it is possible that the bake element shorted when it opened up and took out the contacts in the thermostat. Looks like that part is NLA...

Read More
Chat in RI -
October 06, 2012
A:

The reason that I thought it might be a fuse is that on the schematic the upper oven light switch power comes off after the cutout and Note 4 says - "Hi-temp cutout interrupts power to bake element and oven lights". However, the schematic doesn't show any fuse at all although it is listed for sale. I guess I will have to pull the oven and follow the wires, was hoping that the fuse would be in an accessible location and I wouldn't have to. Thought maybe it might be in the front where the clock etc. is.

Read More
Anonymous -
October 06, 2012
A:

Thank you for your question and I understand your concern.

There are two high temperature cut out thermostats located on the back of the oven. The upper high temperature cut out thermostat is located on the back of the oven on the lower right side of the upper oven. It's not likely a faulty thermostat but it could be.

When the upper bake element burned out and shorted it could have took out the oven thermostat, selector switch or possibly a relay. Thermador wall ovens have a lot of wires and I strongly suggest calling a service technician to diagnose and repair your wall oven. The oven will need to be pulled out in order to check the high temperature cut out thermostats and the oven is extremely heavy. NOTE: Disconnect the power supply from the oven before sliding it out and servicing.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
October 08, 2012
See more answers