Model #MMV4205AAB MAYTAG Microwave/Hood Combo

  • Control Panel/door Assembly
    3 Results
  • Cavity
    3 Results
  • Blower Motor
    3 Results
  • Base/latch Board Assembly
    3 Results
  • Outer Case/vent Grille
    3 Results
  • Supplemental Information
    3 Results
  • Installation
    3 Results
Find part by diagram >

Question and Answers

Q:

Why won't oven turn on Maytag mmv4205aab

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your microwave. I know what a time saver the microwave is and I am sure you want this issue fixed quickly.  In this case I recommend you have the microwave serviced by a qualified technician.
 
We do not give diagnostic or repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is unplugged from the power supply. Special equipment is needed to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after ANY/ALL microwave service.
 
For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME (1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project.
 

Read More
CarlosZ -
Sears Technician
April 29, 2015
Q:

Why is my Maytag microwave oven not heating?

A:

It sounds like a thermal protector has failed. If the inside of the oven cavity gets too hot a safety thermostat will prevent the unit from heating any further. This type of testing will require removing the cover & taking voltages & resistance checks. I recommend calling for service on something like this.

Read More
biker dave -
Sears Technician
November 10, 2009

Top Parts