Model #MMV1153BAW MAYTAG Microwave/Hood Combo

  • Control Panel/door/vent Grille
    3 Results
  • Base/internal Controls
    3 Results
  • Supplemental Information
    3 Results
  • Body/cavity/blower Motor
    3 Results
Find part by diagram >

Question and Answers

Q:

Microwave door no longer latches MMV1153BAW Maytag Maytag microwave

Q:

Start & Stop/Clear do not work. MMV1153BAW

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your microwave. I know what a time saver the microwave is and I am sure you want this issue fixed quickly.  In this case I recommend you have the microwave serviced by a qualified technician.

 

We do not give diagnostic or repair information on microwave ovens because they are inherently dangerous to service. Microwaves contain high voltage internal components that can retain a lethal electrical charge even when the microwave is unplugged from the power supply. Special equipment is needed to work on a microwave starting with an anti-static wrist strap grounded to the microwave to even test components in it. Even minor door repairs and adjustments can cause microwave leakage, and a microwave shielding leakage test MUST be performed using a survey meter after ANY/ALL microwave service.

 

For these safety reasons I strongly recommend having this repair completed by a qualified service technician. You can schedule service online at www.SearsHomeServices.com or by calling 1-800-4-MY-HOME (1-800-469-4663). Here at SearsPartsDirect.com we love to help you with your repairs, but our expert advice is that microwaves are just too dangerous for a do-it-yourself project.

 I trust this information will help you, we appreciate your business thank for choosing Sears.

 

 

Read More
CarlosZ -
Sears Technician
April 15, 2015
Q:

My Maytag over the range microwave just dies and I dont understand why? The Model number is MMV1153BAW.

A:

Microwaves are so relied on in today's kitchen. It can be upsetting when one stops dead like this. While you wait for the expert answer you can check a similar question I found at a repair web site. It may help while you wait for the expert answer. If you do decide to have a technician diagnose and make repairs, an option is to visit Sears Home Services and use the handy scheduler.

Read More
Barbara H. -
October 14, 2010
A:

Thank you for your question.

I am sorry that your microwave has stopped working. In most cases today�s microwaves are very reliable.

� It sounds like the internal line voltage fuse has failed and that is why you do not have anything working.

Microwaves are inherently dangerous to service.They contain high voltage internal components that can retain a lethal electrical charge even when the microwave is completely unplugged. A microwave shielding leakage test must be performed on the unit using proper testing equipment following any internal component access or repair before the microwave can safely be returned to service. These are the reasons why I recommend that you have a service technician repair this microwave failure.

� You would have to open the front of the microwave to get to this fuse and as mentioned above that could be dangerous to do unless you are a technician.

� I would suggest you have a microwave technician service your microwave.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
October 15, 2010
See more answers

Top Parts