Model #MJ9200D MAJESTIC APPLIANCE Residential Dryer

  • Cabinet Parts
    3 Results
  • Tub/drum Asy
    3 Results
  • Electric Parts
    3 Results
  • Blower
    3 Results
Find part by diagram >

Question and Answers

Q:

MJ9200D blows room temperature air only. A wire has burned out at least twice now and I suspect 3 times. MJ9200D Majestic Appliance Dryer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

is there a lint trap in the dryer MJ9200D Majestic Appliance Dryer

A:

Thank You for contacting ManageMyLife.com

I can understand the confusion with this dryer. After researching your model I found that this dryer does not have a lint filter/trap. But I do recommend checking the exhuast hose for lint build-up and clear it out.

If you have further questions please let me know.
Thanks for using ManageMyLife.com

Read More
Desirea -
Sears Technician
September 23, 2013
Q:

Do I need to replace my dryer's electric fan motor?

A:

Diagnosing dryer problems can be difficult. The expert will review this model and reply within two days, possibly sooner. If parts are needed or a technician is needed, the links below will help.

Read More
Barbara -
August 04, 2013
A:

Thank you Barbara!

Read More
Haddy -
August 04, 2013
A:

I have since attached an inline duct fan to hold me over until I either fix or replace the fan motor, and my drying time is down to around 45 minutes compared to 4+ hours. I am reluctant to buy a replacement part as they cost over 200 dollars which is what I paid for the w/d set. I can't imagine too many parts failing on that simple motor so I am hoping it is a fuse that I am not finding, that is the problem. The fan does not turn on at all, it doesn't even try to spin, so it makes me think that it's not the bearings or any mechanical aspect, but an electrical problem. There isn't any corrosion on the motor coils, nothing seems loose, etc so I am hoping that it is a simple fix. I imagine the motor failed due to over heating from there being so much lint backed up from the previous owner. I have since vacuumed the drum so it is free of lint. Looking forward to hearing a response. Thanks

Read More
Haddy -
August 05, 2013
A:

Thank you for your question and I understand your concern.
 
I assume the drum motor will operate. 

I do not show any type of fuse connected in the fan motor circuit as shown in the wiring diagram I provided in the image below.
 
I recommend checking the electrical circuit connected to the blower/fan motor for any type of fuse. If you do not find any type of fuse connected in series with the fan motor circuit, you will need a voltage meter to check the voltage supply across the two wires connected to the fan/blower motor. If voltage is present, the fan motor is likely faulty. If you do not measure 120 volts, check the wiring and connections in the fan motor circuit. NOTE: I do not recommend making any voltage measurements unless you have experience and feel safe and confident in doing so; otherwise I recommend calling a service technician to diagnose and repair your dryer.
 
 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 
 
If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.
 
 

Read More
Joey S -
Sears Technician
August 06, 2013
See more answers