Model #MHWE900VJ00 MAYTAG Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Steamer, Pump And Motor Parts, Optional Parts (not Inc
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

water in drum. MHWE900VJ00 Maytag Residential washer

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number mhwe900vj00 and f35 indicates analog pressure sensor failure. If this failure is displayed, the central control unit has detected a malfunction of the analog pressure sensor. Check if the pressure hose is fixed correctly and without holes or damage. Check if the airtrap is not blocked and check if the hose itself is not blocked. Here is a link for a video that may help with some additional troubleshooting. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
December 02, 2014
Q:

Sud MHWE900VJ00 Maytag Residential washer

A:

Thank you for choosing SearsPartsDirect.com. I will be more then happy to assist you. If the washer is completely drained and does not have any suds the problem is likely a failed pressure switch. If the switch does not register empty, the suds light will come on. Before ordering the pressure switch, I recommend checking the pressure hose. To do this, remove the hose from the switch and blow into it. If it is clear, I recommend replacing the pressure switch. Hope this information has help you. If you are not comfortable doing this repair you can Click Here to schedule a technician or call toll free 1-800-469-4663. Any further questions or concerns. You will have to post a new question because at this time I can not reply to any comments. Again, Thank you for choosing SearsPartsDirect.com.
 

Read More
Samantha A -
Sears Technician
June 06, 2014

Top Parts