Model #MHWE300VW12 MAYTAG Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Rear counterweight for MHWE300VW12 mHWE300vw12

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize the rear counterweight for your washer is no longer available by the original manufacture. The manufacture has not given us a subsitute. You would need to purchase a used part or purchase a new unit.

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 11, 2015
Q:

F22 Error MHWE300VW12 Maytag Automatic washer

A:

Hello, glad to help.  Thank You for choosing Sears PartsDirect.com.
 
I am sorry and do understand your frustration when getting the F22 error code on the washer.
 
Glad to help out.   Im  looking at your Maytag Washer model number MHWE300VW12.
 
F 22 = DOOR LOCK ERROR:
Indicated during Diagnostic Test only.  During the start of a cycle, the appliance goes to pause mode.  A Door Lock Error occurs if the door cannot be locked.  It will try to lock it 6 times before displaying the error code.

POSSIBLE CAUSES/PROCEDURES:

->  Door lock mechanism is broken or removed from door.

->  Door switch/lock unit failure.

1.  Unplug washer or disonnect power.

2.  Check door switch/lock unit.

3.  Check the wire harness connections to the door switch/lock unit and Central Control Unit (CCU).

The door can latch and still be defective.  It is the wiring of the door latch that is most likely causing this problem.   Most likely all you need is the door latch itself.

Door lock for the model  MHWE300VW12
 
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 
 

Read More
Larry L -
Sears Technician
July 21, 2014
Q:

Washer will not power on. MHWE300VW12 Maytag Automatic washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the washer.
 
Glad to help out.   Im  looking at your Maytag Washer model number MHWE300VW12.

What I would do is take the control panel away from the console panel.   Try to run your fingers over the control area and see if the start button will dislodge and come free.   Then put together and try again.  Maybe get some contact cleaner from a hardware to spray on it and see if you get lucky.   

If not then looks like you will need to replace the control board which I have on the link below.

User interface/control for the model 
MHWE300VW12 

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
June 10, 2014

Top Parts