Model #MHWE200XW00 MAYTAG Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Washer door boot torn MHWE200XW00 Maytag Automatic washer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model MHWE200XW00; I have posted a link of the door boot to order the door boot click here.  I have posted a link of some videos that can help you replace the door boot, to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 10, 2015
Q:

LF Error on machine MHWE200XW00

A:

Thank you for your inquiry on your Maytag Washer, Model: MHWE200XW00. From reviewing the details on your model, I have included an insert from the service manual on what the LF error code means and what could be the probable causes of the error code.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the washer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 04, 2015
Q:

i have a F7 E1 error code MHWE200XW00 Maytag Automatic washer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model MHWE200XW00; the “F7 E1” indicates that the control is unable to properly detect the motor speed. Unplug the washer power cord and check the connections between the motor and the motor control board make sure that there is not damaged or disconnected. If the wires are ok then the technician will have to diagnose the problem to find out which of the control boards or the motor is the part at fault.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 25, 2015

Top Parts