Model #MGS5870ADQ MAYTAG Slide-In Range, Gas

  • Body
    3 Results
  • Oven/base
    3 Results
  • Door/drawer
    3 Results
  • Gas Controls
    3 Results
  • Wiring Information
    3 Results
  • Top Assembly (adq)
    3 Results
Find part by diagram >

Question and Answers

Q:

install oven igniter

A:

Oven repairs can be easy or difficult. The ignitor is often one that many homeowners do. themselves. I attached a similar question that may help while youi wait for the expert. If you would feel more comfortable having a qualified technician help, an option is Sears Home Services at the second link below. I hope this helps.

Read More
Barbara H. -
March 09, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the oven. Before you start the repair, you will need to unplug the range and remove the racks. Then click on the image below. The image shows how to remove the door and the oven bottom. Then remove the drawer and any covers that block your view of the gas valve. Now remove the two screws securing the ignitor. Set the ignitor aside and mount the new ignitor. Feed the wires down along the old ignitor wires. Now you can go below to make the wire connections. If the plug on the new ignitor matches the old one just plug it in. If it is different, you will need to splice the new ignitor to the old connector. I have found a video that shows the steps to install the ignitor. Click here to watch the video.

I hope this is helpful. Please let me know if you need further assistance.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 12, 2012
See more answers
Q:

spark module

A:

When our appliance is not working correctly we see good money going out the window. It is always a little frustrating when an appliance acting up on us. I did some research at Managemylife website and found some expert answers to a similar question that may help until your expert can respond. I have attached the link below so you can check it out. If you do decide to schedule service and have a qualified technician assist you, I have attached a link to SearsHomeServices.com. I hope the links below will help you.

Read More
James -
March 09, 2012
A:

I provided access information for that spark module in the images below. Unplug the range and shut off the gas supply before accessing internal components. You will probably need to lift that top and remove the side panel to access and replace that spark module. I provided the wiring diagram for the range in the last image in case you need it. If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician replace that spark module, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 12, 2012
A:

Here are additional pages that show access information for that range.

Read More
Lyle W -
Sears Technician
March 12, 2012
A:

Here is the wiring diagram.

Read More
Lyle W -
Sears Technician
March 12, 2012
See more answers

Top Parts