Model #MGRS752BDW MAYTAG Free Standing, Gas

  • Control Panel/top Assembly
    3 Results
  • Oven/base
    3 Results
  • Body
    3 Results
  • Gas Controls
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
  • Door/drawer
    3 Results
Find part by diagram >

Question and Answers

Q:

How to maintain flame on oven burner?

A:

How to maintain flame on Oven burner is a really great question to find out. While you are waiting on an expert to answer your question, I was researching your question in the Manage My Life website on how to maintain flame. I attached the link below. Hope this helps!

Read More
Dezeray S -
November 17, 2010
A:

I recommend that you have a service technician examine the burner and adjust the flame.

The first image below shows the basic information on gas burner flame characteristics. You should have been able to adjust the flame on this range by using the procedure shown in the second image. Since the flame is lifting, you should have closed the air shutter to a point where they don't lift.

You did not mention whether the range was converted to LP gas recently. If the range was converted, I recommend that you check the orifice hood on the oven burner to make sure that the correct LP hood is installed. I provided the LP conversion information for that type of range in the third image below. A qualified installer is needed to properly convert the range to LP gas.

These tips may help you resolve this range problem. If you need more assistance, reply with additional details.

Here is a link for the Sears Service website in case you need it: Sears Home Services .

If you need a qualified installer to properly convert the range to LP gas, you can check with your local gas company. The ServiceLive.com website also has installers in most areas that can help you with this task. Here is a link for that website: ServiceLive.com

Read More
Lyle W -
Sears Technician
November 19, 2010
See more answers

Top Parts