Model #MGR7662WS0 MAYTAG Free Standing, Gas

  • Cooktop Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Manifold Parts
    3 Results
  • Chassis Parts
    3 Results
  • Door Parts
    3 Results
  • Drawer & Broiler Parts
    3 Results
  • Optional Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

gas oven not working.

A:

I understand that your gas oven is not working properly. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
January 26, 2013
A:

I see that Alina posted a link for a previous answer that provides some troubleshooting for that failure. You could have a problem with the Direct Spark Ignition System in that range. That previous answer refers you to troubleshooting for that system. I posted the images for troubleshooting that system below as well. That system is fairly complicated to diagnose and repair. If you get to the point where you need to have a service technician examine and repair the range, you can schedule service through this link: Sears Home Servcies . If you need more help, let us know. Note: If you suspect that you have a gas leak in the range, you should exit the house and call the gas company and fire department from a neighbor�s home.

Read More
Lyle W -
Sears Technician
January 29, 2013
See more answers
Q:

My oven bake and broil doesn't work.

A:

Having your oven's bake and broil elements fail can be a real nightmare. I did some research and provided a link to a similar question and answer on our site. I hope this will shed a little more light on the issue until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
January 18, 2013
A:

Thank you for your question. I know it's frustrating when the oven stops working. When both bake and broil fail to work, the most likely problem will be with the control. It's possible the spark module, igniters or valves may have failed but it would be very unlikely that both bake and broil would go out at the same time. If you would like to make a quick check of the control, first disconnect the power. Remove the back panel cover to gain access to the control and disconnect the black wire from terminal 2-4 and the red/white wire from terminal 2-7 and connect these wires together. Now reconnect the power and if the bake burner fires, it will indicate the control has failed and will need to be replaced. The color would be needed to get the correct control. If it still won't fire, some voltage checks will need to be made, to determine if the spark module, the igniters or the valves have failed. A technician may be needed to make these checks. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
January 21, 2013
See more answers

Top Parts