Model #MGR5755QDW MAYTAG Free Standing, Gas

  • Control Panel/top Assembly
    3 Results
  • Cabinet
    3 Results
  • Cavity
    3 Results
  • Gas Controls
    3 Results
  • Door/drawer
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

trying to replace hinges on Maytag gas range model mgr5755qdw.

A:

I can understand you need for proper instruction on this hinge replacement repair.  I have located a link that will discuss your repair in more detail.  Click here to view the link.  Though this link discusses a different model number, the mechanics are likely going to be very similar.Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this will help you and have a nice day.

Read More
Henry -
April 22, 2013
A:

I posted an image below that provides some information on accessing those hinges. You should find screws around the perimeter of the door that can be removed to release the outer door panel. You should then be able to remove the screws that secure the hinges in that oven door. Replace the hinges and reassemble the door. 


If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
April 23, 2013
See more answers
Q:

Maytag stove mgr5755qdw

A:

I am sorry to hear about the difficulties. Managemylife.com can take the mystery out of the repair. Your expert can help you determine what is happening with your appliance. The ManageMyLife website is a great place to find answers to questions that need qualified and insightful responses. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner. I have provided an expert answer to a similar question to assist you. If you decide to schedule service, and have a qualified technician to assist you, I have attached the link to searshomeservices.com. I hope this will be useful until your expert can respond.

Read More
James -
July 31, 2012
A:

Thank you for your question and I understand your concern.

I must assume only one electrode is sparking at one of the 4 burners.

When any one burner knob is turned to the light position, all 4 electrodes should spark. When any burner is turned to the light position, the igniter switch completes the path of voltage to the spark module which should cause all 4 electrodes to begin sparking until the knob is turned from the light position.

Base on your symptom it may have faulty spark module or 3 of the wires electrode wire connections have come loose at the spark module. The burners must also have a good ground or the electrode will not spark. I would check the wiring connections at the spark module and at each of the spark switches on top of each burner valve.

Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 01, 2012
See more answers
Q:

how to in stall oven door on Maytag MGR5755QDW

A:

It is common that what comes apart easily may not go back together as well. While you wait for the expert to review and respond to your question, you can check a very general how to from another web site in the second link. I also added the schematics from Sears Parts Direct to the first link. It sometimes helps to see an exploded view.

Read More
Barbara H. -
June 03, 2011
A:

The procedure for removing the oven door is shown in the image below. To replace the oven door, hold the oven door at the angle of the first stop position and insert the door onto the hinges.

If you need more help with this procedure, send us some digital pictures to illustrate the problem that you are having if possible.

Read More
Lyle W -
Sears Technician
June 04, 2011
See more answers

Top Parts