Model #MFC2061KES MAYTAG Bottom-Mount Refrigerator

  • Handles (mfc2061kes)
    3 Results
  • Left Refrigerator Door
    3 Results
  • Right Refrigerator Door
    3 Results
  • Freezer Door
    3 Results
  • Ref Dr Storage & Center Hinges
    3 Results
  • Water Dispenser/water Tank/water Filter
    3 Results
  • Controls
    3 Results
  • Refrigerator Shelves
    3 Results
  • Crisper Assembly
    3 Results
  • Pantry Assembly
    3 Results
  • Evaporator Area & Rollers
    3 Results
  • Compressor
    3 Results
  • Cabinet Back
    3 Results
  • Ice Maker
    3 Results
  • Supplemental Information
    3 Results
  • Interior Cabinet/toe Grille/frz Shelves
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

Maytag fridge will not dispense water...?

A:

with the water dispenser not working an your refrigerator can be a huge inconvenience. I have done some research on the Manage MY Life website and have located several links similar to your issue. While you are waiting for a detailed reply from an expert I have provided the links below. Hope this helps!

Read More
Priscilla V -
April 13, 2012
A:

I know that it can be very frustrating to have issues with the water dispenser. Since you did not indicate whether or not you can hear the motor running, I am going to assume it does. This means that any of the water lines could be kinked or clogged preventing the water from coming in. The inlet water valve on the back of the refrigerator could also be the issue. It is possible that only one side of the water will stop working. You can test the wiring going to the valve to see if the water dispenser is telling it to open. You will need and Ohm/Volt meter to check for continuity on the line. If there is replace the valve. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
April 14, 2012
See more answers
Q:

Ice maker stopped making ice.

A:

A ice maker is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
aashe -
January 02, 2012
A:

Thank you for your question. I know it can be disappointing when the icemaker stops working. This icemaker has some test terminals on the module that may help determine what the problem is. To access the terminals, pull the front cover off of the icemaker. The terminals will be marked (see picture) and using a well insulated jumper, place it between the L - V terminals. Now press and hold the door switch in. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker # D7824706Q will need to be replaced. If no water flows but you can hear a humming noise, the water valve # 67006531 will need to be replaced. If nothing at all happens, some voltage checks will need to be made. A technician may be needed to make these checks. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, reply to this thread and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
January 05, 2012
See more answers

Top Parts