Model #MERH752BAB MAYTAG Free Standing, Electric

  • Control Panel/top Assembly
    3 Results
  • Body
    3 Results
  • Oven/base
    3 Results
  • Door/drawer
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

Can't control the oven MERH752BAB Maytag Maytag cooking

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

 

I am sorry and do understand your frustration when there is problems with the range.

Glad to help out.   Im  looking at your Maytag model number MERH752BAB.

 Dan the first thing is to pop the  circuit breakers.  Turn off the range for at least a coulple minutes and reset the controls.  If doing that and  you still have the same problems then looks like  you may need a new circuit board. What to do first is look at the controls.  Look at the wire hook ups and see if there is a bare or burnt wire.  If all looks well then will look like you need a new control board.   Now to save you some money (a little hint).  Call our Sears parts by phone 1-800-366-7278 and ask for the part by the model number then ask them to do a price match.   May be able to save some money and really worth a try.

Control boad per model MERH752BAB 

If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com 

 

Read More
Larry L -
Sears Technician
September 20, 2013
Q:

how to remove a door handle off a maytag oven MERH752BAB

A:

Detailed instructions can really come in handy when replacing a part on your range and I will be happy to help. I did some research and I was able to find a link with a similar question. I hope this helps with your research while you wait for your expert response. 

Read More
Joseph P. -
March 19, 2013
A:

You will need to pull the oven door off of the range to replace that handle. That procedure is shown on page 21 of your owner's manual. Here is a link for that document in case you need it: Owner's Manual.

 

Once you remove the oven door, you can separate the panels to access the screws that secure the handle and the top trim to the outer oven door panel. Remove screws from the bottom of the door and the top of the inside panel.  Once you release that outer panel, you should be able to access and remove the screws that hold the handle in place. Remove the screws and replace the handle. Reassemble the door.

 

I hope that this information helps. If you need more assistance, reply with additional details. 

Read More
Lyle W -
Sears Technician
March 20, 2013
See more answers

Top Parts