Model #MER5775QAB MAYTAG Free Standing, Electric

  • Control Panel/top Assembly
    3 Results
  • Cabinet
    3 Results
  • Cavity
    3 Results
  • Door/drawer
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

changing an element in my maytag model MER5775QAB MER5775QAB

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

I have a maytag oven that wont heat above 200 degrees would that be the bake element or the oven sensor?

A:

I see your Maytag Oven won't heat up any higher then 200 degrees. I found a question in Manage My Life under the Answers button that is similar to the one you asked. I think this information will give you some useful information. I attached the link below. I hope this helps!!!!!

Read More
Raquel F -
July 30, 2010
A:

Thanks Raquel I will try it

Read More
SeanCassano -
July 30, 2010
A:

This will be a problem with either the control or the sensor. To determine between the 2 parts a resistance check will need to be made on the sensor. The oven temperature sensor should have a resistance measurement of 1100 ohms at room temperature. If the sensor measures approximately 1100 ohms, the oven control # 74009223 will need to be replaced. If it does not measure 1100 ohms, replace the oven sensor # 12001656. To check the resistance, be sure to disconnect power to the range first and also disconnect the sensor, when it's pulled out. If you would like more assistance, additional details will be needed.

Read More
Scott D -
Sears Technician
August 02, 2010
A:

so since my oven sensor reads 1107ohms I need a new oven control

Read More
SeanCassano -
August 02, 2010
See more answers

Top Parts