Model #MER5550BAW MAYTAG Free Standing, Electric

  • Control Panel
    3 Results
  • Top Assembly
    3 Results
  • Oven/base
    3 Results
  • Body
    3 Results
  • Door/drawer
    3 Results
  • Wiring Information
    3 Results
  • Supplemental Information
    3 Results
Find part by diagram >

Question and Answers

Q:

Maytag Model# MER5550BAW, Oven will not heat up. MER5550BAW Maytag Range

A:

Thanks for the inquiry and for using SearsPartsDirect.com. I am sorry to hear that neither bake nor broil are working in the oven cavity, I know how frustrating that is to have occur.

With neither element heating, that is a tale-tell symptom of a communication error between the electronic control board/clock and the oven cavity. Usually when this type of issue occurs, a replacement control board would be needed to solve the issue.

To make sure that the control needs to be replaced, we would recommend having a Sears Home Service technician come to the house to test the board with a ohm meter to check for continuity. If you would like to set up an appointment for a technician, click here to be directed to the page to set up service.

Let us know if you have any further questions and thanks for using SearsPartsDirect.com. We wish you all the best with the repair and the range. 

Read More
Jeff Wallace Sr -
Sears Technician
October 31, 2013
Q:

Operation of Electric Range Maytag model MER 5550 BAW

A:

I know how important it is to have the owners manual for your range since it carries some good information. Below you can access the owners manual. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
January 24, 2012
A:

Thank you for your question and I understand your concern.

I added a link to the Owner's manual that will have the instructions you are looking for. I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
January 25, 2012
See more answers
Q:

My Maytag range clock MER5550BAW no longer displays after several power outages. What is the cause? Is there a fuse?

A:

It is so handy to have the time available on your appliance and when it is not working it can be upsetting. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Alina F. -
January 21, 2012
A:

Thank you for your question and I understand your concern.

Your model range does not have a fuse in it that could fail and prevent the electronic range control/clock from powering up. If the range is getting the proper voltage, the electronic oven control/clock will need be replaced. On the clock/oven control is terminal marked L1 and N. If 120 volts is measured across L1 and N, the clock/oven control is faulty and will need to be replaced. NOTE: I do not recommend checking and confirming the voltage unless you have experience and feel safe and confident in doing so; otherwise I recommend calling a service technician to diagnose and repair your range.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
January 23, 2012
See more answers

Top Parts