Model #MER5550AAH MAYTAG Free Standing, Electric

  • Control Panel
    3 Results
  • Top Assembly
    3 Results
  • Body
    3 Results
  • Oven/base
    3 Results
  • Wiring Information
    3 Results
  • Door/drawer
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Question and Answers

Q:

Loose oven handle on Maytag oven

A:

I am sorry that you are having some difficulties with your range door handle and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
April 15, 2013
A:

Thank you for your question. I understand your concern about the loose door handle. This can get more difficult than it would appear. With most of these models, the bottom and top trim will need to be removed to take the door apart to access the handle screws. First, remove the door and lay it down when making this repair. Open the oven door and place the door hinge locking device into the lock position. Now, place oven door in the first stop position, then grasp both sides and lift up off the hinge receivers. Remove the screws securing the bottom trim to the oven door and slide the outer oven door glass and trim towards the bottom of the oven door and remove. Now you should be able to disassemble the door to access the handle screws. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Read More
Scott D -
Sears Technician
April 17, 2013
A:

Thank you, Scott D. I will try this and let you know in a couple of days. It sounds like more than I thought.

Read More
Al -
April 17, 2013
See more answers

Top Parts