Model #MDG9206BWW MAYTAG Residential Dryer

  • Control Panel
    3 Results
  • Cabinet-front
    3 Results
  • Cabinet-rear
    3 Results
  • Door
    3 Results
  • Tumbler
    3 Results
  • Gas Valve
    3 Results
  • Motor Drive
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have replaced the drun rollers and the belt. But, the drum is still hitting the top of the exhaust fan. What can I do to fix this? mdg9206bww Maytag Dryer

A:

Thank You for contacting SearsPartsDirect.com

I understand you frustration when the drum hitting the duct. The problem is not with the drum. It is actually an issue with the duct. I show the duct was redesigned, but the parts are no longer available. I was about to locate some information about bending the duct to stop the noise. Click on the link below to view the image.

Image- Duct information

If you need further assistance, please resumbit your question with additional details. Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
January 15, 2014
Q:

I have Maytag Gas Dryer, Model MDG9206bww, and I have the new tumbler belt. It is the same as the belt that I removed, but the belt has too much slack when put

A:

Instructions are the most important things to have when it comes to removing and replacing parts on appliances. While you are waiting on an expert to answer your question, I found your owners manual in the Manage My Life website. I have attached the link below. Have a nice day!

Read More
Dezeray S -
April 16, 2012
A:

Thank you, Dezeray. But, replacing the belt is not in the installation guide. I also found the installation guide online and I still have my original guide. I need more help than this guide provides. Still searching for the answer or a picture.

Read More
Susan -
April 16, 2012
A:

Thank you for your question and I understand your concern.

Based on your symptom and details it sounds like you do not have the belt routed properly under the belt tensioner and around the motor pulley. I added an image below of how to route the belt.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
April 17, 2012
A:

Thank you, Joey. That picture is exactly what we needed!!!

Read More
Susan -
April 17, 2012
See more answers

Top Parts