Model #MDG7400AWW MAYTAG Residential Dryer

  • Control Panel
    3 Results
  • Cabinet
    3 Results
  • Door
    3 Results
  • Gas Valve
    3 Results
  • Heater
    3 Results
  • Motor Drive
    3 Results
  • Tumbler
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
  • Wiring Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

i have a maytag atlantis dryer mdg7400aww. timer will not advance. i have heat

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the dryer. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Barbara H. -
December 01, 2011
A:

Thank you for your question and I understand your concern.

The electronic dryness control board located inside the control panel is likely faulty. I will not be able to provide the part number because I would need to know the series number. The series number is the first two digits of the serial number. I recommend calling Sears PartsDirect at 1-800-366-7278 and let them know the model number and serial number and tell them you need the dryness board and not the moisture sensor bars. The parts list is incorrect and they may need to research the proper part number.

This may be the issue. If not, please reply and I will be glad to assist you further. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
December 03, 2011
See more answers

Top Parts