Model #MDG5500AWW MAYTAG Residential Dryer

  • Control Panel & Cabinet
    3 Results
  • Cabinet-rear
    3 Results
  • Door
    3 Results
  • Gas Valve
    3 Results
  • Motor Drive
    3 Results
  • Tumbler
    3 Results
  • Wiring Information
    3 Results
  • Wiring Information (at Series 34)
    3 Results
  • Wiring Information Series 62 And Above
    3 Results
  • Wiring Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do you tighten the tension on the dryer belt? Mine is slipping. MDG5500AWW Maytag Residential dryer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model MDG5500AWW; there is a spring that puts tension on the idler arm. The spring may need to be replaced.

Thank you for choosing Sears Parts Direct. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
August 19, 2015
Q:

Ignition failure MDG5500AWW Maytag Residential dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model MDG5500AWW; it sounds like the ignitor may need to be replaced. The ignitor allows the dryer to begin the heating process, if the ignitor does not get hot enough it will not open the gas valve to ignite. I have posted a link of the ignitor to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
April 01, 2015
Q:

What is the continuity supposed to be for the thermistor and the coils on my Maytag gas dryer model #MDG5500AWW ??? MDG5500AWW Maytag Residential dryer

A:

Thank you for choosing sears I would be happy to help you with your dryer. Upon researching model MDG5500AWW; to test the dryer parts for continuity you will need to unplug the dryer power cord. The valve coils test should read about 1300 ohms, if the test reads a lot different,   then the coil may need to be replaced. The resistance for the thermistor is 10k ohms at 70 degrees.

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
February 17, 2015

Top Parts