Model #MDE9306AYW MAYTAG Residential Dryer

  • Control Panel
    3 Results
  • Cabinet-front
    3 Results
  • Door
    3 Results
  • Cabinet-rear
    3 Results
  • Heater
    3 Results
  • Motor Drive
    3 Results
  • Wiring Information
    3 Results
  • Tumbler
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

No hot air in dryer? MDE9306AYW Maytag Electric dryer

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dryer and do understand your frustration. Glad to help out. Im looking at your model number MDE9306AYW and If the dryer is not heating you could be experiencing an issue with the thermal fuse (307473), multitemp thermostat (307249), high limit thermostat or the thermal cut-off (kit 303396 ) . If you have an ohms/volt meter you can test these parts for the proper continuity. To test the parts, disconnect both wires from the components and test them at room temperature. The ohms reading for these components should be zero ohms. If the high limit thermostat is faulty, then replace the thermal cut-off as well and vice versa. They two components work together and come as a kit. If they component listed above test good, then the issue may be with the heating element (307184 ) and I recommend testing it as well. You'll want to get a reading of 7.8 - 11.8 ohms for it to test good.  I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thanks for choosing Sears PartsDirect.com.


SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others. 

Read More
Sherman_G_Wallace -
Sears Technician
March 25, 2014
Q:

Maytag Dryer Model MDE9306AYW

A:

Replacing the belt on the dry is a very great do it yourself project. I was able to find some general information that might help you along in finishing the project.

Read More
celene -
February 07, 2011
A:

Thank you for your question and I understand your concern. Between the link Celine provided and the images I added below you should be able to replace the belt with no problems. NOTE: Disconnect the power cord from the power source before servicing your dryer.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 09, 2011
See more answers

Top Parts