Model #MDC4650AWB3 MAYTAG Dishwasher

  • Door And Panel Parts
    3 Results
  • Control Panel And Latch Parts
    3 Results
  • Inner Door Parts
    3 Results
  • Lower Washarm Parts
    3 Results
  • Heater Parts
    3 Results
  • Fill And Overfill Parts
    3 Results
  • Tub And Frame Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Upper And Lower Rack Parts
    3 Results
  • Upper Wash And Rinse Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a mdc4650awb3 portable dishwasher that will not come on. Also the control panel lights do not lite. Is the control panel fried?

A:

When an appliance like a Maytag dishwasher goes out I usually see money going out the window, either in repair cost, or replacement. Managemylife.com can take the mystery out of the repair. Your expert can help you determine if you should consider replacing or repairing an appliance. I did some research for you at this web site and found an expert answer to a similar question which may shed some light on the problem. If you decide to schedule service, and have a qualified technician to assist you, I have attached the link to searshomeservices.com. I hope this will be useful until your expert can respond.

Read More
James -
June 02, 2012
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your dishwasher not working. We are here to help. Based on what you said there is several thing that could be wrong. They are as follows:

  1. Verify the outlet where it is plugged in is working. Unplug the dishwasher and plug a lamp or radio into the same socket.
  2. If the outlet is good you need to test the door switch,control panel, and power cord with a multimeter. Next, replace the part that tests bad. I hope this helps.

To order parts please visit SearsPartsDirect.com with the model number.

If you do not feel comfortable repairing this problem yourself, then you can have it repaired at your home by a Sears Technician. You may visit SearsHomeServices.com and click on the red next now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
June 04, 2012
A:

John, The door switch and power cord check out ok, but what am I looking on the multimeter when I text the control panel?

Read More
Kenny -
June 14, 2012
A:

Kenny, Look for a blow fuse and or burned resistor on the main control board. Also,Check and ohm out the connections from the control panel. Look for any bad solder connections on both circuit boards.

Read More
John H -
Sears Technician
June 16, 2012
See more answers
Q:

Maytag dishwasher control panel won't start or light up

A:

I can understand how this would be very inconvenient problem for you. While you are a waiting for your expert answer, I have found a link that will provide some information and troubleshooting for the problem. It sounds like the main control board needs to be replaced. The link include instructions on how to test this. I hope this link helps.

Read More
aashe -
August 14, 2011
A:

Thank you for your question and I understand your concern.

If the dishwasher will not power up then it could have a power cord issue, lack of proper voltage or possible a faulty control board or wiring. Try plugging the dishwasher into another outlet since it's a portable dishwasher. If it won't power up when plugged into another wall outlet then I suggest calling a service technician.

The voltage supply will need to be checked and confirmed where it connects to the control board. The voltage should be checked across the Black wire on J5 connector and the White wire located to the right of yellow wire. NOTE: I do not recommend checking voltages unless you have experience and you feel safe and confident in doing so; otherwise I recommend calling for service. If voltage is present then it likely has a faulty control board.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 16, 2011
See more answers

Top Parts