Model #MDBTT70AWB MAYTAG Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Track & Rack Assembly
    3 Results
  • Tub
    3 Results
  • Water Distribution Assembly
    3 Results
  • Pump & Motor
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

need parts list Model #MDBTT70AWB

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit and located the parts list. The link is attached below. Thank you for choosing Manage My Life.

Read More
Carmen G -
January 28, 2013
A:

Thanks for contacting ManageMyLife.com. I see Carmen provided you a link to our sister site SearsPartsDirect.com which contains the parts images and lists. Click here to view that. You would most likely need to print the parts diagrams and lists from that site through your browser. Sorry it is not available any other way.

Please feel free to let me know if you need further assistance.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
January 28, 2013
See more answers
Q:

Maytag Quiet Series 300 dishwasher model MDBTT70AWB

A:

Having an appliance not working properly can be quite annoying especailly with the holidays here. While you are waiting on an expert to answer your question, a suggestion I have is to visit Sears Home Services website to set service with a Sears technician. I attached the link below. Hope this is helpful!

Read More
Dezeray S -
December 07, 2010
A:

From the description you give I suggest running a diagnostic cycle. The test will run all functioning parts for short time.

The image below shows how to enter the "Field Service Test" which will cycle through and flash an error code at the end. This would be a good start. The instructions to enter the test are in the image below.

Try this first and see what works and if you get any error codes. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
December 08, 2010
A:

I ran this test and it didn't work. When we pressed the Heated Dry key 6 times and pressed start, it went into the normal wash mode and filled with water, agitated 4 times intermittently and then stopped. So we pressed start again and it went to 2 on the screen and proceeded to empty the dishwasher. So what is the next step. Is my Board fried.

Read More
lifar -
December 09, 2010
A:

If the unit will not run the correct diagnostic test or give an error code to indicate why it wouldn�t then yes your control most likely will need to be replaced. The control 99003431 can be obtained for about $121 dollars. I suggest a technician install the control especially if you don't have a grounding strap. If you damage the control then you are stuck with it. If a technician shorts the control then he is responsible.

Read More
Fred M -
Sears Technician
December 10, 2010
See more answers

Top Parts