Model #MDBTT60AWW MAYTAG Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Track & Rack Assembly
    3 Results
  • Tub
    3 Results
  • Water Distribution Assembly
    3 Results
  • Pump & Motor
    3 Results
  • Wiring Information
    3 Results
  • Supplemental Information
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to remove tighten loose dishwasher spray arm MDBTT60AWW

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number MDBTT60AWW and here is a link for a video that may help with the repair. From what I can see on the video the spray arm does have some play. I recommend watching the video and try to determine if anything is in fact damaged. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 06, 2015
Q:

Maytag QuietSeries 300 (MDBTT60AWW) Trips Breaker - seems to happen after load is finished MDBTT60AWW

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

It’s hard to say with this cause it could be an easy cheap fix or a hard expensive fix. The parts I’m showing it could be is a control board, Door switch, or heating element.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
Samantha A -
Sears Technician
October 15, 2014
Q:

My Maytag Quiet Series 300 will not work properly MDBTT60AWW

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the dishwasher.
 
Glad to help out.   Im  looking at your Maytag Dishwasher model number MDBTT60AWW.

Sorry for the trouble.   I know from expierience of me and a lot of others is to first try the door.   Open it then close it a little harder than normal to see if the dishwasher will come back on.

Not getting any lights would be a control board problem.  I would take the panel off and look to see the control board.   Find if there are any bare, broken, or burnt type wires first.   If so then easy fix.   If not then it sure sounds like you need the control board which I have on this link -> Control board for model 
MDBTT60AWW


 Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.

Read More
Larry L -
Sears Technician
May 19, 2014
A:

When i looked at the circuit board, there was no obviius problems. The circuit board also looks like there is quite a coating of conformal coating on it. It seems more likely that the problem is in the control panel. You are the expert so i trust your opinion, i just wanted to relay this information to you.

Read More
Shawn -
May 19, 2014
See more answers

Top Parts