Model #MDBH945AWW MAYTAG Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Track & Rack Assembly
    3 Results
  • Tub
    3 Results
  • Water Distribution Assembly
    3 Results
  • Pump & Motor
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

pdxadam@gmail.com mdbh945AWW

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Mytag model #MDBH945AWW dish washerwon't start wash cycle

A:

I did some research on the unit and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
August 06, 2013
A:

I understand needing to have further information regarding the repair to your dishwasher. I am happy to help. Even though this sounds simple, I recommend turning the power off to the unit. You can do this by tripping the circuit breaker. Leave the power disconnected for about a minute before turning it back on. At times there can be a glitch within the electrical system and this can reset it.

Once that is done try another cycle and if the panel is lighting up the dishwasher might be giving you an error code. These can be helpful because that will let us know which part has failed. The image below contains instructions to enter and run diagnostic tests. The Manual Function Test will turn various parts on and off. The Field Service test will run through a test and display potential error codes. Try this first and reply back with further details. From there I will be happy to continue assisting you.

If you do not feel comfortable performing these tests, I highly recommend scheduling for a service appointment. If you decide to this you can schedule via this link: Sears Home Services.

Thank you for using Manage My Life.

Read More
Desiree -
Sears Technician
August 07, 2013
A:

my washer light blinks 5 tims and still not start

Read More
jerry -
October 30, 2013
See more answers
Q:

Matag dishwasher won't start when start buton is pushed.

A:

I am sorry that you are having some difficulties with your dishwasher and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your dishwasher troubles while you wait for your expert response.

Read More
Joseph P. -
December 18, 2012
A:

I believe you have a control problem. The display lights should be illuminated even if the door switch is bad. The diagram below may be helpful to you if a meter is available. The console is about $190 dollars so I would strongly suggest checking voltage to the control first. I hope this helps. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
December 19, 2012
See more answers

Top Parts