Model #MDBF750AWQ MAYTAG Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Track & Rack Assembly
    3 Results
  • Tub
    3 Results
  • Water Distribution Assembly
    3 Results
  • Pump & Motor
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


can't get the wire into start switch MDBF750AWQ Maytag Maytag dishwasher


Thank You for choosing Sears and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number mdbf750awq and the wires should just pull off of the old switches. Usually if you can not remove the connection from the switch is if it melted on to the switch. If you are not able to remove you may need to replace the wire harness. I trust this information will help you.


Thank you for choosing Sears


SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 06, 2014

Top Parts