Model #MDB3700AWE MAYTAG Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Rinse Aid & Soap Dispenser
    3 Results
  • Track & Rack Assembly
    3 Results
  • Tub
    3 Results
  • Pump & Motor
    3 Results
  • Wiring Information
    3 Results
  • Supplemental Information
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dishwasher MDB3700AWE repair

A:

I know that it can be very frustrating to have issues with your dishwasher. You should not be able to move the diverter like this. You will need to tighten down the nut, but make sure all of the seals are in place first. If you don't feel comfortable doing this yourself, please click on this link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
October 02, 2013
Q:

When you're hot you're hot

A:

Dishwashers are one of the best appliance to have in a home it helps out with all the dishes to be clean. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician. I have attached the link below. Have a nice day!

Read More
Dezeray -
April 25, 2012
A:

Use caution checking live voltage. The diagram below may be helpful to you. This particular unit the voltage can be checked at the motor with the motor disconnected. It would be better to test the voltage under load while the motor is running. You can also check the voltage under load at the door switches on the black and white wire. Use caution trying this. Remember to turn the power off first while accessing the motor and/or door switches.

Read More
Fred M -
Sears Technician
April 25, 2012
See more answers
Q:

Standing water

A:

This is a problem none of us want. I found some information on the Manage My Life website similar to your issue. While you are waiting for a detailed reply from an expert I have provided the links below. If you do decide to have a technician diagnose and make repairs, an option is to visit Sears Home Services and use the handy scheduler,which I have also added the link below. Hope this helps!

Read More
Priscilla V -
April 12, 2012
A:

Hi Michael,

Thank you for submitting a question to Manage My Life.

When water is left in a dishwasher at the end of a cycle you would look at drain lines, drains pumps, and the like. When water appears after a dishwasher has sat for a little while you should look at drain hose height, make sure there is not a siphon issue, and check for water leaks. The water inlet valve may be leaking. To check this, turn the water supply off to the washer. If there is no extra water in the dishwasher after a period of time you know the inlet valve is the culprit. Check the house drain, water can come back in if the house drain is backed up. Also make sure you have a drain hose loop. This dishwashers' drain hose must have a loop with a minimum height of 32 inches above the finish floor. Here is a link to the Installation Guide for this dishwasher. The drain requirements start on page 4.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed for your Maytag model number MDB3700AWE dishwasher .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
April 13, 2012
A:

Thank you for your answer. What is the siphon issue you speak of? Where is water siphoning from? Where is it siphoning to? As I stated the drain in the sink works fine. The drain hose and flapper valve were replaced so I dont see how water could be getting into the tub via the drain hose. The inlet valve was checked, it showed no leakage, but I replaced it anyway. The problem persists.

Read More
Michael -
April 13, 2012
See more answers

Top Parts