Model #MAYTAG MAYTAG Dishwasher

  • Dishwasher Tools & Accessories
    3 Results
  • Dishwasher Tools & Accessories
    3 Results
  • Dishwasher Tools & Accessories
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

maytag dryer medx600xw0

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model medx600xw0;  I have posted an image of instructions for how to disassemble the unit.

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
March 12, 2015
A:

My maytag dryer medx600xw0 is making a loud and squeaking and screeching sound after it's on for several minutes. Also, how do you disassemble the unit?

Read More
Glenn Landhan -
January 27, 2016
See more answers
Q:

uE error code 79631512210 Kenmore Elite Washer

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when getting an error code on your Washer display. I did look into the model number you have provided and I have found information that will assist you. 

The UE code indicates that the control detects an unbalanced load in the washer that cannot be redistributed. Press the START/PAUSE button and try to redistribute the load. Here are some problems that can cause this error code:

Washing loads that are too small.

The washer is not level or not stable. Make sure that the washer is leveled properly front to back and side to side. Press down on opposing corners to make sure that all 4 feet are firmly on the floor. Adjust the leveling legs if necessary.

Laundry can sometimes gather to one side. Redistributing the load manually can resolve this issue.

Some items like rugs or mixed loads may not be able to be distributed properly.

Try running the washer without any items added and see if it will spin properly. If not, you could have a problem with the control board or the hall sensor on the motor that detects motor speed. I recommend that you have a service technician diagnose and repair this type of problem.

Thank you for your question. Have a great day. 

 

Read More
Natasha12 -
Sears Technician
January 14, 2014
A:

This is completely unacceptable. If you cannot wash a small load without having it take more than an hour to do so, then this washer should not have even been made. I purchased this washer along with an entire house full of appliances just over a year ago, and if I knew I would have this trouble with no help from Kenmore, I would have bought another brand. 4 out of 5 load in this washer will delay because of the UE warning. You try to rdistribute the loads and sometimes it takes 5 or six times. A washing machine is supposed to wsh the clothes that are put into it. You should not have to make 5 trips to the basement to redistribute the loads manually. When I run the washer without clothes, there is no warning. The washer is level and stable and was set up by the Sears deliverymen. I have read that there may be some different springs or sensors for this washer, but no one has contacted me with any updates

Read More
Ross -
February 06, 2015
A:

We are having the same issue as Ross. This is unacceptable and the repairman just left telling us he cannot find anything wrong with the machine. Really? There is something WRONG if I need to redistribute the clothes several times for each load. Worst washing machine I have ever owned and no one to "fix" it.

Read More
GAIL -
April 23, 2015
A:

I am in compete agreement, having the exact same problem. There have to be more people having this issue, surprised I haven't heard more complaints, unless it really is a circuit board issue for select cases. I'm on the phone now trying to get a technician to look at it but reading this I want a credit from Sears for the amount I paid toward a new washer for selling quite frankly an unacceptable machine.

Read More
Bg -
June 01, 2015
A:

I have the same problem!! Makes me so mad. I live alone so my loads are not large. Sears needs to look into this, PLEASE.

Read More
DEBRA -
August 10, 2015
A:

I have the same problem and the problem occurs for more than every other load. I have two kids and this means that we are running 3-4 cycles over and over again, each week. The washer was delivered ~2 months ago, and has no worked without issues for 2 days in a row. Also, often times the spin does not dry the clothes sufficiently for them to be dry with one cycle in a Kenmore Elite Dryer. This is unacceptable.

Read More
Mia -
August 23, 2015
A:

How large should a load be? Is there a standard to meet, such as a weight range, or do you measure in cubic feet, or some other way? Thanks

Read More
marc -
September 05, 2015
A:

I want to add that I have the very same problem with this machine-goes off balance if the load is normal to light. I have learned I need to put more stuff in! So I do. The repair lady said it looked fine, but I'm glad to learn it isn't just me...

Read More
Julie -
September 16, 2015
A:

Same issue with my new Kenmore Elite washer. Three pair of slacks, one towel. UE code, I restarted several times, manually adjusted several times until it finally decided that the load was not unbalanced. Been trying to complete this load for 4 hours. Something definitely not right with this washer. Perhaps software/firmware update is in order.

Read More
Charles -
October 18, 2015
A:

I have this same problem. It's infuriating!!! Seems like it is worse with smaller loads, but I don't always have a large load to wash. It's been taking me 4-5 hours to complete one load of laundry. When I open the lid, the clothes are evenly distributed. It also seems to be better if I use low spin cycle, however, the clothes are more damp when they go into the dryer. Ugh. I hate this washer right now. I've had it a couple of years and it's recently become really bad with the UE code. HELP!!!!!

Read More
MARYBETH -
November 03, 2015
See more answers
Q:

Fabric Softener Dispenser MVWB850YW0 Maytag Automatic washer

A:


Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when the softner is backing up in your washer. 

On most front load washers, you can remove the dispenser drawer from the housing. Remove the drawer and check for a clog or buildup on the bottom of the dispenser housing where it drains into the hose that carries the water and detergent into the washer tub. 

If you do not find an item or clog restricting the flow from the dispenser housing, you may be able to unplug the washer and check the hose from the dispenser to the tub. On most washers, you can access this hose by removing the top panel. Pull the hose off and check for a clog or restriction in the hose.

I have attached the images to remove the top to get to the dispenser. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
November 12, 2014
A:

I have top top open. The area around the bleach dispenser is rusting out... How do I remove the bleach dispenser and bezel (part #23 and 24) so I can get at the rusted area?

Read More
Johneo -
January 20, 2016
A:

Never mind I figured it out .. didn't want to break it at $31 for plastic part

Read More
Johneo -
January 20, 2016
See more answers