Model #MAVT634AWW MAYTAG Residential Washers

  • Cabinet
    3 Results
  • Supplemental Information
    3 Results
  • Top
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Wiring Information
    3 Results
  • Control Panel
    3 Results
  • Wiring Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Need help diagnosing final spin/rinse cycle. MAVT634AWW Maytag Maytag laundry

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

It sounds like there is an issue with the transmission on the washer itself. I would recommend having a tech come out and take a look at the unit and diagnose the issue.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
February 11, 2015
Q:

Why is my washer leaking from the bottom MAVT634AWW Maytag Maytag laundry

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your washer  and do understand your frustration. Glad to help out. Im looking at your model number MAVT634AWW and removing the front panel will give you access to the inside of the machine. First you will need to tilt the machine back slightly to remove the belt from the pulley and the drain pump. You will now set the machie down and will need a putty knife to pry up each corner on the front and this will allow the top to lay back. The front panel will have 1 5/16" screw on each side of the front, holding the front panel to the machine. Once the front panel is off you will be able to see where the water is coming from. It is possible that the drain pump is leaking (front right). I recommend checking after the machine has done a load. 

 
 
I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page.
 
If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 

Read More
Sherman_G_Wallace -
Sears Technician
February 11, 2014
Q:

tub seizing up on maytag atlantis washer mavt634aww

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
July 07, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when having trouble with the washer.

Sorry to hear of the trouble.   When it seems like the brakes are locked up.   That means it is usually the transmission or the seal hub bearing which is right between the transmission and the tub.

I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.

http://www.searspartsdirect.com/partsdirect/part-number/21001536/0026/464?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=21001536&sid=MMLxexpertmerch

http://www.searspartsdirect.com/partsdirect/part-number/21001868/0026/464?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=21001868&sid=MMLxexpertmerch

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
July 08, 2013
A:

could it be the rotisserry brake

Read More
william -
July 09, 2013
A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do apologize for not being able to be 100 percent since I am not there.   Is there also any noises.   Is there any oil on the floor?    Thrust bearing kit is a great possibility.   Is your pulley freely turning?   Here is a diagram of the parts in there.  

William, I have seen other people with the same problem and they said to fix theres that they changed the thrust bearing kit.   I will send pictures.   No where do I see that it wil be the brake, but always a possiblity.  

http://www.searspartsdirect.com/partsdirect/part-number/12002213/0026/464&pathTaken=partSearch&blt=14&prst=0&shdPart=12002213&sid=MMLxexpertmerch

 

Read More
Larry L -
Sears Technician
July 10, 2013
See more answers

Top Parts