Model #MAV6457AWW MAYTAG Residential Washers

  • Control Panel
    3 Results
  • Top
    3 Results
  • Cabinet
    3 Results
  • Tub
    3 Results
  • Transmission
    3 Results
  • Base
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Instructions to change a pump on a Maytag washing machine. Model number is MAV6457AWW.

A:

I did some research on the model number but was not able to find the instructions for replacing the pump. Your expert will be able to help answer your question. It may take two business days. I do hope that everything works out.

Read More
Marc -
March 26, 2013
A:

Thank you for your question.  I am sorry you are having a problem with your Maytag MAV6457aww washer

Caution:  Before attempting any repair, unplug the washer from the wall. 

To access the drain pump you will need to remove the front panel and will need to tilt the unit back to access the bottom.  The images below may be helpful. 

You can reply below with any additional details for further assistance. 

 

Read More
Fred M -
Sears Technician
March 27, 2013
See more answers
Q:

maytag washing machine MAV6457AWW The washing maching is not washing

A:

Washers are appliances we count on daily so having it mess up can be really frustrating. While you are waiting on an expert to answer your question, I found some great links in the Manage My Life website. You can also set service with a Sears technician. I have attached the link below. Hope this helps!

Read More
Dezeray S -
March 24, 2012
A:

Hi Joseph,

Thank you for submitting a question to Manage My Life.

Check the agitator bolt, if the bolt is secure and the agitator is not damaged you will need to check the brake/clutch and transmission. Remove the front panel and confirm the belt is turning the large pulley in agitation. If the pulley is turning the transmission shaft but there is no agitation action from the transmission then you will have to replace the transmission. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed for your Maytag model number MAV6457AWW washer .

I hope this is helpful, and if I may be of further assistance please include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
March 24, 2012
See more answers
Q:

Maytag Washer #MAV6457AWW: I need to replace the timer, and the original part has been substituted to part #22004189M298.

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina F. -
October 13, 2011
A:

The timer 22004189 you get should be the same as the timer being replaced. I show no substitution for this timer.

I suspect you have the wrong timer if it differs greatly from the original. Most of the time if a part is substituted then there will be instructions.

The image below shows how to access and remove the timer.

Read More
Fred M -
Sears Technician
October 16, 2011
See more answers

Top Parts