Model #MAV2757AWW MAYTAG Residential Washers

  • Control Panel & Top
    3 Results
  • Cabinet & Front Panel
    3 Results
  • Inner - Outer Tub
    3 Results
  • Transmission
    3 Results
  • Base & Motor
    3 Results
  • Supplemental Information
    3 Results
  • Wiring Information
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

PUMP PULLEY FELL OFF MAV2757AWW Maytag Washer

Q:

my washer is not spinning fast enough MAV2757AWW Maytag Washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the washer not spinning fast as it should.
 
Glad to help out.   Im  looking at your Maytag Washer model number MAV2757AWW.
 
Could be a few different problems to look at for why it isn't spinning fast as it should.

1.  The drive belt being worn out.

2.  Bad spin bearing.

3.  Brake not releasing.

4.  Restriction in the water drain system - Check drain hose for not being kinked or clogged.   Check the drain trap to make sure it isn't clogged also.

5.  Diverter valve/hose not sealing correctly.

6.  Check under the tub and see if there is any grease leakage from the transmission.

Service
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: www.SearsServiceCrew.com
 
 
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
July 14, 2014
Q:

wash will not spin MAV2757AWW Maytag Washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when the washer will not spin.
 
Glad to help out.   Im  looking at your Maytag Washer model number MAV2757AWW.
 
The belt is in its place but is it as tight as it should be?
 Being that the belt is good 

The washer not spinning could be cause by several things and it will need to be inspected.

First you should check the space between the inner and out tub for clothing that may have floated over the inner tub. If clothing gets between the inner and outer tub it can bind the inner tub and stop spinning.

Use a flash light or similar light and shin on the otter tub into the inner tub, if you see a dark area that could be clothing, remove splash guard and fish the item out.

Next if the above is not the issue the most likely cause is the clutch or the spin bearings. This repair involved complete teardown and cost and time should be considered vs replacing the washer.

Service
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: www.SearsServiceCrew.com
 
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
June 16, 2014

Top Parts