Model #LXR7244JT1 WHIRLPOOL Residential Washers

  • Top And Cabinet/literature
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket, And Tub
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Miscellaneous/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


replace lid switch on washer


You will need to unplug the washer and pull the cabinet off to access the lid switch in this washer. This link of a previous answer has an illustrated procedure for this process: Why does my Kenmore washer model 110.24422300 fill but not agitate nor spin?

Your washer will be slightly different than the one shown in the previous link. The screws that secure the console on your washer to the top panel are on the back of the end cap on each side of the console. The rest of the procedure is basically the same. Pull the cabinet forward or off of the washer and replace the lid switch. Make sure that you get the cabinet replaced properly by following the reassembly tip.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 05, 2010

Top Parts