Model #LTF2140FS1 FRIGIDAIRE Residential Washers

  • Control Panel
    3 Results
  • Cabinet/top
    3 Results
  • Motor/tub
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

washer leaving clothes soaking wet LTF2140FS1 Frigidaire Washer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help you. Upon researching model LTF2140FS1 I show that it is a front load unit. IT could be that the belt is wearing out and not spinning it enough. The pump could be going out where it's not draining enough water. Check the load cycle selected to make sure it is correct for amount of clothes being washed.

If you have any further questions please re-post question. Thank you for choosing Sears. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
June 06, 2014
A:

Thank you for choosing Sears Parts Direct. I will be happy to help you. Upon researching model LTF2140FS1 I show that it is a front load unit. IT could be that the belt is wearing out and not spinning it enough. The pump could be going out where it's not draining enough water. Check the load cycle selected to make sure it is correct for amount of clothes being washed.

If you have any further questions please re-post question. Thank you for choosing Sears. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
June 06, 2014
A:

Thank you for choosing Sears Parts Direct. I will be happy to help you. Upon researching model LTF2140FS1 I show that it is a front load unit. IT could be that the belt is wearing out and not spinning it enough. The pump could be going out where it's not draining enough water. Check the load cycle selected to make sure it is correct for amount of clothes being washed.

If you have any further questions please re-post question. Thank you for choosing Sears. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
June 06, 2014
See more answers
Q:

Frigidaire Front Loading Washer

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
November 14, 2011
A:

Hi Anita,

Thank you for submitting a question to Manage My Life.

The first thing I recommend is checking for error codes. This washer has a test routine you can run that will help in the diagnosis of any problems the control detects. If the control detects a problem it will identify it with an error code. I am including this information in a set of images below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

Please perform the diagnostic tests detailed here and report back with your findings. Be sure to record any failures and when they occur along with any error codes that are displayed.

Landell

Read More
Landell -
Sears Technician
November 15, 2011
See more answers
Q:

frigidaire front load washer does not spin or drain

A:

I know how important it is to have a good working washer in your home so that you can keep your clothes nice and clean. While you are waiting for an expert answer, I suggest you add the full model number of your washer so that the expert can provide you with a more detailed answer. I did manage to find a link that will problem that will provide you more information about your problem. I hope my link is useful.

Read More
Joseph P. -
February 05, 2011
A:

On something like this we will need a model number for reference. It sounds like the timer or motor may be causing problems.

Please reply back with a model number & description of what the washer will do so we will be able to provide you with model specific troubleshooting & repair tips.

The first responder's link may be helpful.

Read More
biker dave -
Sears Technician
February 07, 2011
A:

THE MODEL NUMBER IS LTF2140FS1

Read More
eduardo -
February 07, 2011
A:

Thanks for providing that model number. This type of washer will normally flash the console lights in a pattern to provide an error code when it stops and will not spin. The information about the error codes is provided in the images below. You can recall the error code that was probably being signaled by using the procedure shown in the first image. The third image shows a list of the error codes. The second image has more information about error codes and provides a diagnostic test that you can run on the washer. The other images provided below contain additional technical information about the washer including a wiring diagram and diagnostic tests. I suspect that you may see the E21 error code that indicates a drain problem in the washer. Make sure that the washer drain is working properly. Check the drain hose for kinks or clogs. You may need to use the procedure shown in the final image to access the drain pump and check for clogs in that area. Be sure that you UNPLUG the washer before accessing internal components. If you remove hoses below the washer with water still in the drum then you will need to be prepared to catch that water in a shallow container (or containers). These tips may help you with this washer failure. Reply with additional details (error code) if you need more help.

Read More
Lyle W -
Sears Technician
February 08, 2011
A:

Here are additional images.

Read More
Lyle W -
Sears Technician
February 08, 2011
A:

Here is the final image.

Read More
Lyle W -
Sears Technician
February 08, 2011
See more answers

Top Parts