• 3 Results
  • Console, Control And Door Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Tub And Components
    3 Results
  • Drive Components
    3 Results
  • Counterweights
    3 Results
Find part by diagram >

Question and Answers


Why does my White Westinghouse model washer model LT200PXD2 go through the wash cycle but will not go into high speed spin?


When the washer will agitate and turn in spin but not in high speed the motor is usually okay.

Your description mentioned the drain pump was still running at the end of the spin cycle and I assume the water does all drain out and if the water drains but the drain pump keeps running and the washer doesn't go into spin the pressure switch can be the problem. If the pressure switch doesn't rest to empty the washer will not try to do a high speed spin. Make sure the wash does not have excessive suds. The water level switch may be the cause of this problem.

Check the door is locked during the cycle. The washer won't spin if the door is not locked.

I hope this information helps to solve your problem or at least give you a better idea of what to look for that might be causing this problem.

I'd recommend a technician check and repair this problem. If you have any additional questions about this problem then submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
May 02, 2009

Recommended maintenance parts & accessories

Show 3 more
No more item to show