Model #LSR8133HQ0 WHIRLPOOL Residential Washers

  • Top And Cabinet
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

washer over flows LSR8133HQ0 Whirlpool Automatic washer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model LSR8133HQ0; it sounds like the water level switch may need to be replaced. The water level switch controls the water level in the washer so when it fails it can cause the washer to over fill. I have posted a link of the water level switch to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 10, 2015
A:

thankyou I will take care of it and make my wife happy

Read More
Mark -
August 10, 2015
See more answers
Q:

Whirlpool washer model LSR8133HQ0 filling and draining but not agitating or spinning. Not a safety latch issue.

A:

When an appliance goes out I usually see money going out the window, either in repair cost, or replacement. Managemylife.com can take the mystery out of the repair. Your expert can help you determine if you should consider replacing or repairing an appliance. I did some research for you at this web page and found an expert answer to a similar question which may shed some light on the problem. If you decide to schedule service, and have a qualified technician to assist you, I have attached the link to searshomeservices.com. I hope this information will be useful until your expert can respond.

Read More
James -
February 18, 2012
A:

I know how important it is to keep your washer running correctly. It sounds like you may have a broken motor coupler. This is a set of plastic discs that connect the motor and the gearcase together. This is key #13 on the first image below. The second will show you how to replace it. You can order this part from this link Sears Parts Direct If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
February 21, 2012
See more answers
Q:

Whirlpool washer fills and drains but will not agitate or spin. Looking to troubleshoot the part I may need.

A:

Washer problems can be difficult to diagnose without some expert advice. I would suggest adding the complete model number to help the expert provide the best answer possible. I did locate a similar question that may help. I attached the link below.

Read More
Barbara H. -
February 18, 2012
A:

whirlpool washer model number LSR8133HQ0

Read More
michael -
February 18, 2012
A:

Also, it is not the lid switch safety switch. I can bypass this and the agitator will still not spin or agitate.

Read More
michael -
February 18, 2012
A:

Also, it is not the lid switch safety switch. I can bypass this and the agitator will still not spin or agitate.

Read More
michael -
February 18, 2012
A:

I know how important it is to keep your washer running correctly. It sounds like you may have a broken motor coupler. This is a set of plastic discs that connect the motor and the gearcase together. This is key #13 on the first image below. The second will show you how to replace it. You can order this part from this link Sears Parts Direct If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
February 21, 2012
See more answers

Top Parts