Model #LSR7300PQ0 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Controls And Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Whirpool Washer Model# LSR7300PQ0


I know that it can be very frustrating to have issues with your washer. If the washer just fills and does nothing else, the issue could be with the lid switch. The switch can be checked two ways. The first way is with a volt/ohm meter and you can check continuity across the two terminals on the switch. The circuit should show open and closed as the lid is open and closed. If you have no meter then the lid switch can be bypassed to see if it is the problem. The idea is to remove both of the wires from the lid switch and join (jump) them together with a small wire. With the lid switch bypassed you can see if the washer will drain and spin. The image below shows how to remove the cabinet to access the lid switch but look at the bottom of the instructions to see how to bypass the lid switch. Remember to unplug the washer before access and checking the lid switch. If you don't feel comfortable doing this yourself, please click on this link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My

Read More
AnneJ -
Sears Technician
October 29, 2013

Top Parts