Model #LSR5132PQ0 WHIRLPOOL Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Controls And Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Washer Control Knob LSR5132PQ0

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number LSR5132PQ0 and here is a link that may help with the repair. Click here  for images that may help. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 14, 2015
Q:

wont spin fast LSR5132PQ0 Whirlpool Residential washer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Henry -
June 09, 2013
A:

I know that it can be very frustrating to have issues with your washer. It sounds like what you’re describing is a weak clutch. If the clutch pads wear too thin or if oil gets on the clutch the unit will not spin up to full speed. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
June 10, 2013
See more answers
Q:

On a Whirlpool washer model number LSR5132PQO is the Skate PLT is it suppose to be lose or tight when you open the washer?

A:

If the clothes are too wet coming out of the Whirlpool washer, it may cost you more to dry them. I am providing a few links on washer with similar issues. Hope this helps while an expert responds with additional information.

Read More
Anna T -
July 29, 2012
A:

Thank you for your question and I understand your concern.

The skate plate should move freely in all horizontal directions between the base and tub support. It can also be lifted up if enough force is used.

Your washer is not likely spinning well because of a worn clutch assembly. I added a video showing the procedure of accessing and replacing the clutch assembly.

The clutch assembly # 285785 for Whirlpool washer model LSR5132PQ0 can be ordered from Sears Parts Direct. NOTE: Disconnect the power cord from the power source before servicing.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
July 31, 2012
See more answers

Top Parts