Model #LSQ9610JQ0 WHIRLPOOL Residential Washers

  • Top And Cabinet/literature
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket, And Tub
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Washer will not spin slow or fast. LSQ9610JQ0 Whirlpool Automatic washer, compact a/w

Q:

I have a Whirlpool washer #LSQ9610JQ0, and it is having a couple of problems. It will leak but only intermittently, usually in soak or drain cycles.

A:

Washers make like so much more convenient. Sometimes diagnosing multiple problems with washers can be difficult. I did find some information for you. I hope that this will assist you until your expert can answer your question. I added the links below.

Read More
Marc H -
April 01, 2012
A:

Hi Nicole,

Thank you for submitting a question to Manage My Life.

From your description the first thing I recommend checking is the drain pump. Here is a video that demonstrates gaining access to and replacing the drain pump on a washer similar to yours; Video . Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. The washer in this video may not look exactly like yours but the procedure is basically the same.

You will need to check the drain hoses, tub and the pump to determine where the leak is coming from.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or to purchase any parts needed for your Whirlpool model number LSQ9610JQ0 washer .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
April 03, 2012
A:

Marc H, Thank you for the info. The video seems to be no longer available. Landell, I appreciate your help. I have looked online for various solutions prior to posting. Thinking that it may be a transmission issue.... We have taken the case off the machine, ran a few cycles and checked the hoses. The area at the time continued to be dry and the hoses are clear from leaks, and do not have deteriation. Will need to take the casing off again and revisit the tub connections. My next questions pertaining to the noise at the time of drain and before the spin cycle. Is this usual if the pump is going bad. This is not the usual sounds as should occur. Online there are sounds for a bad coupler, but not for this one. It sorta sounds like a low tone buzzer/grind. I am thinking this maybe a separate issue to the leak, but wonder if possibly due to one part. Thank you.

Read More
Nicole -
April 08, 2012
A:

Hi Nicole,

To determine if the noise in drain is coming from the pump or the gear case, remove the motor from the gear case and with the pump still connected run a drain cycle. If you hear the noise you know it's the pump. Carefully sit the motor on the floor and do not get anything near it when running.

Check the things I have covered here and if I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
April 09, 2012
See more answers
Q:

How do I remove the back panel on my washer?

A:

The back panel on this model of washer is not made to come off for servicing the inside components. The complete cabinet comes off the frame of the machine from the front. Remove the console end cap screws & flip the console back to the service position. Unplug the plastic 3 wire connector going down through the cabinet. Use a flat blade screwdriver to release the large metal clips holding the rear panel to the top panel, pry off towards the front. Open the lid & start lifting slightly while pulling the cabinet off. Please see the images provided for more information.

Read More
biker dave -
Sears Technician

Top Parts