Model #LSQ9549LW0 WHIRLPOOL Residential Washers

  • Top And Cabinet/literature
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Machine Base
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous/optional
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

cannot remove clothes mover from adgitator to replace dogs tried all suggestions on website still cannot separate model # lsq9549lw0

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Barbara H. -
October 29, 2011
A:

Hi Paul,

Thank you for submitting a question to Manage My Life.

Here is a video that will demonstrate replacing the agitator dogs; Video . Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts. This video is for demonstration purposes only. This washer may not look exactly like yours, but the procedure is basically the same.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Landell

Read More
Landell -
Sears Technician
October 30, 2011
See more answers
Q:

What is the easiest way to remove the inlet water valve from a whirlpool washer model number LSQ9549LW0? Through the top or through the bottom?

A:

Some repairs can be a bit tricky. Replacing the water valve seems to be a fairly easy repair. Below I have provided you with some links that may help you understand how to replace the water valve on your washer. I hope you have a smooth and easy repair!

Read More
Jackie S -
March 03, 2011
A:

Thank you for your question.

I should be able to give you the instructions to replace the water valve in the washer. To replace the water valve on this model you have to remove the cabinet. First, make sure to unplug the washer. Then remove the two screws securing the console to the washer. I have provided an image below showing where they are located. Once the console is loose, flip it up and over the back. Then use the instructions in the second image to remove the cabinet. Once the cabinet is removed, turn the water off to the washer and remove the hoses. Next, note the wire connections and remove them. Then locate the one screw that is securing the water valve from the backside and remove it. To install the new valve just reverse these steps. I recommend putting the hoses into a bucket and turning the valves on before reinstalling them to the new valve. This will flush out any debris in the lines.

Please let me know if you need further assistance on the repair of the washer.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 04, 2011
See more answers

Top Parts